Product Details

Poly pac polymer coagulant Aluminium coagulant aid Chloride water base acrylic polymer (PAC) /Polyaluminium Chloride PAC 30%/PAC Polyaluminum Chloride

Place of Origin Shandong
Certification ISO,CE
Model Number 30%/PAC
Min.Order Quantity 1
Price $ 230-356 / Ton
Payment Terms D/P,T/T

Product Features

Introduction:

Appearance

            Yellow powder

              Yellow powder

Alumina  AL2O3               %

                     30

                     29

Alkalinity                          %

                  60-85

                   60-85

Water insolubles              %

                     0.3

                     1.0

PH(1% water Solution)

                 3.5-5.0

                  3.5-5.0

As(m/m)                          %

                                           ≤0.0002

Pb(m/m)                           %

                                           ≤0.001

Cd(m/m)                           %

                                           ≤0.0002

Hg(m/m)                           %

                                           ≤0.00001

Cr6+(m/m)                        %

                                           ≤0.0005

Application

1.The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.

2. The pH value of the waste water should be adjusted to 6-10 for better result.

3. When the colority and CODcr are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride is used earlier or afterwards depends on the flocculation test and the treatment process.

Packaging & Delivery:

Packaging Details

High purity polyaluminium chloride PAC 30% with Sulfate for Water Treatment Chemicals: 
1. 25kg/bag in a PP woven bag with inner liner 
25kg/bag in a PE woven bag with inner liner 
2. Each Ton in a PP woven bag with inner liner

Coagulation behavior of polyaluminum chloride: Effects of pH

As a pre-hydrolyzed coagulant, PACl is becoming increasingly popular in the coagulation–flocculation process. PACl has many benefits over conventional 

USING POLYALUMINIUM COAGULANTS IN WATER

Sep 6, 2001 - Polyaluminium chloride (PACl), Aluminium chlorohydrate (ACH), Coagulants, Water Treatment. 1.0 INTRODUCTION. Alum (aluminium 

(PDF) Coagulation behavior of polyaluminum chloride: Effects

Feb 23, 2019 - The charge neutralization and sweep coagulation zones of PACl are broader in the ranges of coagulant dosage and pH than those of alum. The 

Characteristics and components of poly-aluminum chloride

We evaluated 51 poly-aluminum chloride (PACl) coagulants to determine the coagulant. 26 characteristics that were responsible for effective arsenate removal 

Comparing Aluminium Sulfate and Poly-Aluminium Chloride

amounts of alum and poly-aluminum chloride coagulants. ... removal is dependent on pH, coagulant dosage, as well as initial turbidity of water for both used 

High-poly-aluminum chloride sulfate coagulants and their

High-poly-aluminum chloride sulfate (HPACS) coagulants with different [SO42−]/[Al3+] molar ratio (S) were prepared and proved to have high coagulation 

Coagulation and Flocculation in Water and Wastewater

The iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride and ferric ... alum may outperform some of the polyaluminum chloride formulations1

Poly aluminium chloride as an alternative coagulant

Feb 12, 2018 - widely used as a coagulant in water treatment plants. Generally large sludge volumes are produced with alum. which requires frequent 

Coagulation/flocculation process with polyaluminum chloride

... .025. Epub 2015 Jun 25. Coagulation/flocculation process with polyaluminum chloride for the remediation of oil sands process-affected water: Performance 
All Products Contact Now