specification:
| Item | Data |
| Apperance | solid powder, yellow |
| Al2O3 | 29% min |
| Basicity | 50-90% |
| Insoluble | 1.0 max |
| PH | 3.0-5.0 |
attention
1. This product is prohibited to be mixed with other chemicals, transported and stored. The product should be stored in a dry, ventilated and cool place indoors.
2. Product effective storage period: liquid for 6 months and solid for 12 months.Solid products can still be used when wet.
3. Plastic woven bag for external use, plastic film set for internal use, specification: 25kg/ bag.
Packaging Detail:
1mt Bag, 25kg/50kg Bag. We can also produce the bags according to customers' request. The 20' container can be packed about 25 ton goods.
Coagulation/flocculation of dye-containing solutions using
This study aims to compare the performance of Polyaluminium Chloride ... the dye (about 85%) with a relatively low dosage (40 mg/l) in their optimum pH range
Effect of pH on coagulation performance of polyaluminum
Figure 2: Coagulation performance of poly-aluminum chloride-sulfate and... Figure 3 shows ... Therefore, the optimum pH of PACl as a coagulant for turbidity removal was 6.5. ... In this study the optimum dosages of (Alum) Aluminium Sulphate
(PDF) Effects of pH and Coagulant Dosage on Effectiveness of
Nov 11, 2015 - This study measures the influence of pH and polyaluminium chloride (PAC) dosage ... coagulant dosage of 0.5 mg Al/mg dye, the optimum pH
flocculation process using polyaluminium chloride (pac)
Optimum condition for the coagulation/flocculation process, such as pH, coagulant dosage and polyelectrolyte dosage of the solution were investigated using a jar
Effect of pH on the coagulation performance of Al-based
Feb 1, 2010 - ... polyaluminum chloride (PAC) in order to investigate the effect of pH on ... The optimum pH range for AlCl(3) and Al(2)(SO(4))(3) was between
Coagulation/Flocculation Potential of Polyaluminium Chloride
Jun 30, 2016 - Dye concentration, dosage, pH and slow mixing timing were varied to find optimum removal conditions. Due to the high charge and solubility of
Effects of pH and Coagulant Dosage on Effectiveness of
Abstract. This study measures the influence of pH and polyaluminium chloride (PAC) dosage on the ... coagulant dosage of 0.5 mg Al/mg dye, the optimum pH
Operator's Guide to Water Treatment Coagulants
polyaluminium chloride (PACl) have less impact than alum. Organic coagulants do ... the optimum coagulation (dosed-water) pH is achieved. These raw waters
Comparing Aluminium Sulfate and Poly-Aluminium Chloride
relatively low levels of aluminium sulfate and poly-aluminum chloride (10 to 20 mg/L). ... accompany with alum and PAC at optimum pH values to investigate its