Coagulation/Flocculation Potential of Polyaluminium Chloride
Jun 30, 2016 - Dye concentration, dosage, pH and slow mixing timing were varied to find optimum removal conditions. Due to the high charge and solubility of
Coagulation/flocculation of dye-containing solutions using
This study aims to compare the performance of Polyaluminium Chloride ... the dye (about 85%) with a relatively low dosage (40 mg/l) in their optimum pH range
Effects of pH and Coagulant Dosage on Effectiveness of
Abstract. This study measures the influence of pH and polyaluminium chloride (PAC) dosage on the ... coagulant dosage of 0.5 mg Al/mg dye, the optimum pH
Operator's Guide to Water Treatment Coagulants
polyaluminium chloride (PACl) have less impact than alum. Organic coagulants do ... the optimum coagulation (dosed-water) pH is achieved. These raw waters
Effect of pH on coagulation performance of polyaluminum
Figure 2: Coagulation performance of poly-aluminum chloride-sulfate and... Figure 3 shows ... Therefore, the optimum pH of PACl as a coagulant for turbidity removal was 6.5. ... In this study the optimum dosages of (Alum) Aluminium Sulphate
Comparing Aluminium Sulfate and Poly-Aluminium Chloride
relatively low levels of aluminium sulfate and poly-aluminum chloride (10 to 20 mg/L). ... accompany with alum and PAC at optimum pH values to investigate its
flocculation process using polyaluminium chloride (pac)
Optimum condition for the coagulation/flocculation process, such as pH, coagulant dosage and polyelectrolyte dosage of the solution were investigated using a jar
(PDF) Effects of pH and Coagulant Dosage on Effectiveness of
Nov 11, 2015 - This study measures the influence of pH and polyaluminium chloride (PAC) dosage ... coagulant dosage of 0.5 mg Al/mg dye, the optimum pH
Effect of pH on the coagulation performance of Al-based
Feb 1, 2010 - ... polyaluminum chloride (PAC) in order to investigate the effect of pH on ... The optimum pH range for AlCl(3) and Al(2)(SO(4))(3) was between
