Product Details

Ferric Sulphate

Place of Origin Shandong
Certification ISO,CE
Min.Order Quantity 1
Price $ 280-300 / Ton
Payment Terms D/A,T/T

Product Features

Product Specification:

Polyaluminium chloride is a kind of inorganic polymer coagulant,the color is yellow or pale yellow,dark brown,dark gray resin solid. It is formed by hydroxylions of bridging function and the order of anionic polymerization,the molecular weight and charge density is higner,the flocculation body forming fast,the applicable range of value is5-9.

Usage
 Mix the product (solid) and normal temperature water at the ratio of 1:2.5-1.3 [weight ratio] for about 30 minutes. After
dissolution of the drug, add 30-40 times of clear water for dilution or dilute to liquid according to the required concentration,
and then use [the greater the turbidity of the source water, the more clean water for secondary release].2. When the turbidity of
source water is 100-500mg / L, the dosage is 3-6mg. For specific dosing, a small test shall be conducted according to the water
quality, and the dosing amount shall be selected and then put into use.

Packaging & Delivery

Packaging Details 25kg/bag

Lead Time : 15 days

Effects of pH and Coagulant Dosage on Effectiveness of

Abstract. This study measures the influence of pH and polyaluminium chloride (PAC) dosage on the ... coagulant dosage of 0.5 mg Al/mg dye, the optimum pH

Effect of pH on the coagulation performance of Al-based

Feb 1, 2010 - ... polyaluminum chloride (PAC) in order to investigate the effect of pH on ... The optimum pH range for AlCl(3) and Al(2)(SO(4))(3) was between 

Effect of pH on coagulation performance of polyaluminum

Figure 2: Coagulation performance of poly-aluminum chloride-sulfate and... Figure 3 shows ... Therefore, the optimum pH of PACl as a coagulant for turbidity removal was 6.5. ... In this study the optimum dosages of (Alum) Aluminium Sulphate 

(PDF) Effects of pH and Coagulant Dosage on Effectiveness of

Nov 11, 2015 - This study measures the influence of pH and polyaluminium chloride (PAC) dosage ... coagulant dosage of 0.5 mg Al/mg dye, the optimum pH

Operator's Guide to Water Treatment Coagulants

polyaluminium chloride (PACl) have less impact than alum. Organic coagulants do ... the optimum coagulation (dosed-water) pH is achieved. These raw waters 

Coagulation/flocculation of dye-containing solutions using

This study aims to compare the performance of Polyaluminium Chloride ... the dye (about 85%) with a relatively low dosage (40 mg/l) in their optimum pH range

flocculation process using polyaluminium chloride (pac)

Optimum condition for the coagulation/flocculation process, such as pH, coagulant dosage and polyelectrolyte dosage of the solution were investigated using a jar 

Coagulation/Flocculation Potential of Polyaluminium Chloride

Jun 30, 2016 - Dye concentration, dosage, pH and slow mixing timing were varied to find optimum removal conditions. Due to the high charge and solubility of 

Comparing Aluminium Sulfate and Poly-Aluminium Chloride

relatively low levels of aluminium sulfate and poly-aluminum chloride (10 to 20 mg/L). ... accompany with alum and PAC at optimum pH values to investigate its 
All Products Contact Now