Product Details

Poly Aluminium Chloride for Waste Water Treatment

Place of Origin Shandong
Certification ISO,CE
Min.Order Quantity 1
Price $ 280-300 / Ton
Payment Terms D/A,T/T

Product Features

Specifications:

Item

Waste water treatment

Drinking water treatment

 

PAC-01

(dark yellow)

PAC-02

(light yellow)

PAC-05

(white)

PAC-09 

(light yellow)

Al2O3 content % ≥

30.0

28.0

30.0

30.0

Basicity %

75.0~90.0

75.0~90.0

40.0~60.0

60.0~80.0

Water insolubles content % ≤

0.5

0.5

0.1

0.1

PH(1% water solution)

3.5~5.0

Note: our product can be made upon your special request.

 

Usuage:

  1. The user can allocate remedy concentration by test and determine the optimum dosage according to different to be added after they are dissolved and diluted.
  2. The dilution ratio of liquid product is 5-50% and the dilution ratio of solid product is 2-20%.
  3. The liquid product dosage is 3-40kg/1000 tons water and solid product dosage is 1-15kgs in 1000L water.
  4. The amount of specific dosing is based on coagulation tests and experiments.

Packaging & Shipping

Packaging Details:25kgs/bags 50kgs/bags ,1000kgs/ jumbo bags or according to the customer's requirement.

Shipping Details: 7 days after signed contract

Effects of pH and Coagulant Dosage on Effectiveness of

Abstract. This study measures the influence of pH and polyaluminium chloride (PAC) dosage on the ... coagulant dosage of 0.5 mg Al/mg dye, the optimum pH

Coagulation/Flocculation Potential of Polyaluminium Chloride

Jun 30, 2016 - Dye concentration, dosage, pH and slow mixing timing were varied to find optimum removal conditions. Due to the high charge and solubility of 

flocculation process using polyaluminium chloride (pac)

Optimum condition for the coagulation/flocculation process, such as pH, coagulant dosage and polyelectrolyte dosage of the solution were investigated using a jar 

Effect of pH on coagulation performance of polyaluminum

Figure 2: Coagulation performance of poly-aluminum chloride-sulfate and... Figure 3 shows ... Therefore, the optimum pH of PACl as a coagulant for turbidity removal was 6.5. ... In this study the optimum dosages of (Alum) Aluminium Sulphate 

(PDF) Effects of pH and Coagulant Dosage on Effectiveness of

Nov 11, 2015 - This study measures the influence of pH and polyaluminium chloride (PAC) dosage ... coagulant dosage of 0.5 mg Al/mg dye, the optimum pH

Coagulation/flocculation of dye-containing solutions using

This study aims to compare the performance of Polyaluminium Chloride ... the dye (about 85%) with a relatively low dosage (40 mg/l) in their optimum pH range

Effect of pH on the coagulation performance of Al-based

Feb 1, 2010 - ... polyaluminum chloride (PAC) in order to investigate the effect of pH on ... The optimum pH range for AlCl(3) and Al(2)(SO(4))(3) was between 

Comparing Aluminium Sulfate and Poly-Aluminium Chloride

relatively low levels of aluminium sulfate and poly-aluminum chloride (10 to 20 mg/L). ... accompany with alum and PAC at optimum pH values to investigate its 

Operator's Guide to Water Treatment Coagulants

polyaluminium chloride (PACl) have less impact than alum. Organic coagulants do ... the optimum coagulation (dosed-water) pH is achieved. These raw waters 
All Products Contact Now